Opta Waive
Blast Cleaning Equipment from Clemco and Marco

2 Cuft Contractor Blast Machines

Clemco Logo

2 Cuft Contractor Blast Machines

High-performance blast cleaning system removes corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. See related literature for additional applications. Machine holds 2 cubic feet of abrasive for up to 30 minutes of continuous blasting at 100 psi with standard No. 4 nozzle (1/4-inch orifice).

Requirements for Operation

These items are required but not included with this equipment:

  • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
  • Maximum working pressure 150 psi
  • Minimum pressure 30 psi needed to operate OSHA-required remote control valves
  • NIOSH-approved, type CE, supplied-air respirator.
  • Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
  • Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
  • Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation

The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

Advantages

  • Two-wheel integral cart for ease of moving.
  • Rated for 150-psi maximum working pressure.
  • 1-1/2-inch Millennium valve provides unrestricted air flow.
  • Quantum metering valve maintains smooth, consistent flow, adjustment knob allows precise control of media flow.
  • 29-inch width fits through standard doorways.
  • Two-wheel integral cart for ease of moving.
  • Robust handles act as skid for loading machine into pickup or trailer and protect valves and piping from damage.
  • Central hookup point for blast hose and remote controls.
  • Weather-resistant storage area holds manuals, paperwork and small parts.

Approvals and Certifications

Clemco's quality management system is ISO 9001-2000 certified.

Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).

Available Literature

21946 - 2 Cuft Contractor Machine System with HP Respirator
21947 - 4 Cuft Contractor Machine System with HP Respirator
21948 - 6 Cuft Contractor Machine System with HP Respirator
22791 - 2 Cuft Contractor Machine System with LP Respirator
22792 - 4 Cuft Contractor Machine System with LP Respirator
22793 - 6 Cuft Contractor Machine System with LP Respirator
22793 - 2 Cuft Contractor Machine with CPF Filter
21950 - 4 Cuft Contractor Machine with CPF Filter
21951 - 6 Cuft Contractor Machine with CPF Filter
21952 - 2 Cuft Contractor Machine
21953 - 4 Cuft Contractor Machine
21954 - 6 Cuft Contractor Machine
21385 - Contractor Products Catalog
21955 - Quantum Manual Abrasive Metering Valve
21968 - Blast Machine Screens & Covers
21956 - Millennium Remote Control Valves